Home    Sony Alpha A100 A200 A300  A700 A900    Minolta FS-1100 FS1100   Konica-Minolta   Minolta Maxxum    Dynax  OTHER DIGITAL CAMERA MANUFACTURERS SAFE SYNCS   Std. Safe Syncs   Custom   Digital Off Camera Safe Sync  Warranty
Contact Us   Site Map  

NEW  FS-1100 (FS1100) FA-ST1AM
WITH (SAFE SYNC) SAFE FLASH VOLTAGE SYNC !

NOTE: This Adapter is now a "made to order" unit only, as we have had very few orders for it.
Allow 2-3 weeks for delivery.

Otherwise -  (If you do not need the 2 small contacts on the rear of the FS-1100 to couple older Minolta Flashes TTL features to the new Sony and/or Minolta Maxxum cameras, The other adapter works just as well.)
Order The Minolta Maxxum Adapter - Click Here
Order The Sony Alpha A100 & A700 Adapter - Click Here. 

We Can Not Call This A Minolta FS-1100 Because Minolta Did Not Manufacture It.
(Note: Beware of other adapters on the internet and Ebay that look like the FS-1100!! They are not the same as ours. They do not have safe sync, and they do not couple the TTL features of the original FS-1100.) 
But Our Adapter Is An Exact Duplicate Of The Minolta FS-1100,
With A Hot Shoe, AND An Added PC Terminal!
And it does more than a Sony FA-ST1AM Adapter.

Our adapter needs no batteries, and is 50% to 75% less expensive than the Sony FA-ST1AM adapter (which uses batteries), and the Sony adapter has only a PC terminal and no hot shoe.

This adapter Will Work On All Minolta Maxxum, Konica-Minolta Maxxum, And Sony A100 & A700 Cameras That Have This Hot Shoe On The Camera Body - 

It has ALL TTL Dedication Functions, Same Type Hot Shoe TTL Connections, AND A PC Connection Terminal on the side of the adapter. The hot shoe and PC terminal are protected from damaging a digital camera by a true safe sync sync circuit.

Some of our competitors say they have a safe sync voltage circuit, but it is not a true safe sync voltage circuit, and it may fail and cause camera damage !!

Our safe sync circuitry protects damage to your digital camera from any flash unit connected to the hot shoe, or connected to the PC cord terminal connector on the adapter. (Up to 400 volts flash sync voltage)

You can use studio flashes and hot shoe flashes at the same time; maintaining hot shoe flash TTL dedication if you are using the old style hot shoe TTL flash to camera coupled Minolta flashes. The hot shoe ALSO accepts standard 3rd party ISO hot shoe flashes with out TTL dedication.

This hot shoe adapter is perfect for any Minolta Maxxum or Konica-Minolta Maxxum camera, or Sony A100 or A700 cameras ! Both digital and film cameras that use the above hot shoe on the camera body. See the photos below -

 The adapter (shown below) has a female PC type sync terminal to plug your non shoe mount flash cord into the adapter. The top of the adapter ALSO has a hot shoe to hold a standard ISO hot shoe mount flash, or a dedicated TTL flash to camera older style Minolta Flash). (Sources – Adapter body imported, safe voltage sync circuit inside the adapter body made in USA). Comes with instructions and a 2 year limited warranty. PC cord not included. Price $89.95, Plus S&H via US Priority Mail Shipped from USA - $9.50. Non- USA buyers contact us for shipping charges. Email us.   

Order Now - Only - $89.95 plus S&H